Export desk · Hong Kong SAR

Pharmaceutical Machinery Manufacturer & Exporter for Hong Kong

In Hong Kong, a manufacturer licence depends on full compliance with PIC/S GMP – and production space is measured in square metres, not hectares. Adinath International makes compact filling, encapsulation, tableting, blister and labeling machines in its Ahmedabad plants, sized to your floor plan and documented for the Drug Office’s licensing inspections.

✓  Compact footprints for small sites   ·   ✓  PIC/S GMP qualification support   ·   ✓  Our engineers on site for start-up

Six head ampoule filling and sealing machine manufactured by Adinath International

Six Head Ampoule Filling & Sealing Machine
Designed and manufactured at our Ahmedabad works

Since 1998

Designing and manufacturing pharmaceutical machinery

3 Units

Filling & packaging, process equipment and encapsulation divisions

25,000 sq. ft.

Combined manufacturing area in Ahmedabad, India

45+ Countries

Where our customers operate Adinath machines

Equipment for licensed Hong Kong manufacturers

Machinery for Hong Kong Pharmaceutical Manufacturers and Packers

Hong Kong’s pharmaceutical manufacturers are licensed under the Pharmacy and Poisons Regulations by a committee of the Pharmacy and Poisons Board, with the Drug Office of the Department of Health acting as its executive arm. Since 1 January 2016 the Board has been a PIC/S participating authority, and full compliance with PIC/S GMP is a key condition for holding a licence.

Local production is concentrated in relatively small, multi-storey sites making oral solids, liquids, external preparations and packed products – some sites hold licences for packaging operations only. That favours machines with modest footprints, quick changeover and clear documentation. Adinath International has designed such equipment since 1998 in its three Ahmedabad units, and the machines now operate for buyers in over 45 countries.

Before we quote, we ask for the room dimensions, door and lift sizes and floor loading as well as the usual URS details. The approved design then defines the machine envelope, utilities and materials (SS 316L wherever product is touched), together with IQ/OQ qualification support and, if needed, Part 11-ready controls. Where a site is being refitted, our turnkey team can help with layout and HVAC.

Hong Kong’s defining constraint is space. Equipment often has to be brought in through a goods lift or a narrow loading bay and set up in an existing industrial building, so we check transport dimensions and weights against your building details, and can split a machine into sections where that is practical – a point we confirm per project in the offer.

What Hong Kong buyers can expect

  • Machine envelope and transport sections checked against your lift and doors
  • Documentation prepared for a PIC/S GMP licensing inspection
  • Panels for 380 V three-phase or 220 V single-phase, 50 Hz
  • Quick-changeover parts for multi-product, small-batch production
  • SS 316L product contact with material traceability
  • Installation, commissioning and operator training by our engineers

At a glance

Hong Kong: the essentials

  • Licensing: Pharmacy and Poisons (Manufacturers Licensing) Committee, Pharmacy and Poisons Board
  • Executive arm: Drug Office, Department of Health
  • GMP standard: PIC/S GMP – Board a PIC/S participating authority since 1 January 2016
  • Power supply: 220 V single-phase, 380 V three-phase, 50 Hz
  • Port: Hong Kong container terminals (Kwai Tsing)
  • Languages: Chinese and English

Machinery range

Pharmaceutical Machinery We Export to Hong Kong

Space-conscious machines for Hong Kong sites – semi-automatic and compact capsule, tablet and liquid fillers, blister packers, labelers and pilot-scale sterile equipment.

01  Sterile injectable lines

Automatic ampoule filling and sealing machine for injectable production

Ampoule Filling & Sealing Machines

Two, four, six and eight head machines for open and closed ampoules, including servo-driven models.

Automatic vial filling and rubber stoppering machine

Vial Filling & Stoppering Machines

Liquid vial filling with rubber stoppering, available with capping and sealing for complete injectable lines.

High speed automatic rotary ampoule and vial washing machine

Ampoule & Vial Washing Machines

Rotary and linear washers that prepare glass containers ahead of sterilisation and filling.

Sterilizing and depyrogenation tunnel for ampoules and vials

Sterilisation & Depyrogenation

Sterilising and depyrogenation tunnels, dry heat sterilisers and ETO sterilisers.

02  Oral solid dosage & blister packaging

Semi automatic capsule filling machine

Capsule Filling Machines

Manual, semi-automatic and high-speed automatic capsule fillers, from R&D scale to production.

Rotary tablet press machine for pharmaceutical tablets

Tablet Compression Machines

Single and double side rotary tablet presses, including mini presses for development batches.

Injectable powder filling and rubber stoppering machine

Powder Filling Machines

Dry syrup powder and injectable powder filling machines for bottles and vials.

Alu PVC blister packing machine for tablets and capsules

Blister Packing Machines

Alu-PVC and Alu-Alu blister packaging machines for tablets and capsules.

03  Liquids, labeling, capping & R&D

Liquid filling machine for pharmaceutical bottles

Liquid & Syrup Filling Machines

Bottle filling and monoblock filling-capping machines for syrups, oral liquids and eye drops.

Automatic bottle sticker labeling machine

Sticker Labeling Machines

Self-adhesive labelers for ampoules, vials and bottles.

Bottle capping and sealing machine

Capping & Sealing Machines

ROPP and screw capping machines for bottles, and cap sealing machines for vials.

R&D model ampoule filling and sealing machine for laboratories

R&D & Pilot Lab Machines

Lab-scale ampoule, vial and bottle machines for development and small-batch work.

Country focus: Hong Kong

Exporting to Hong Kong: Planning Around Your Site

Hong Kong buyers usually need a machine that meets PIC/S GMP and fits a building that was never designed for heavy equipment. These six points are agreed before we build, so delivery day goes as planned.

Manufacturer licence and PIC/S GMP

Licences are granted by the Manufacturers Licensing Committee of the Pharmacy and Poisons Board, and PIC/S GMP compliance is central to the decision. Our drawings, specifications, material certificates and IQ/OQ support material are prepared for the Drug Office inspectors who review your site.

Footprint, lifts and floor loading

Send us the room layout, goods-lift size, door openings and permitted floor load. We check the machine and its transport crates against them, and propose a compact model or a sectional build where the standard design would not fit.

Packing-only operations

Some Hong Kong sites are licensed for packaging rather than full manufacture. Our blister packers, labelers, capping machines and bottle lines suit that work; tell us your licence scope so the line matches it.

380 V or 220 V, 50 Hz

Industrial buildings in Hong Kong usually provide a 380 V three-phase or 220 V single-phase supply at 50 Hz. Small machines can often run on single-phase; the offer states which supply each machine needs and its connected load.

Western and Chinese medicines

Proprietary Chinese medicines are regulated under a separate regime from the Pharmacy and Poisons Board’s. If your plant makes both, tell us which products each machine will handle so the documentation reflects the right framework.

Sea freight into Hong Kong

Each machine leaves Ahmedabad in export crates and travels by sea to Hong Kong’s container terminals, then delivered by truck to your building. Crate sizes are planned for your access route, and the Incoterms set who handles clearance and lifting.

How a project runs

From Enquiry to Commissioning in Six Steps

A clear, documented sequence – so your quality team knows what to expect at every stage.

01

Enquiry & URS

Share your product, container type and size, target output and cleanroom grade.

02

Technical proposal

Machine configuration, layout, utilities, documentation scope and delivery terms.

03

Design approval

You review and approve the machine specification and drawings before manufacturing.

04

Manufacturing

The machine is built in our Ahmedabad units and checked before dispatch.

05

Packing & shipping

Crated to suit your building access and shipped by sea to the Hong Kong container terminals.

06

Installation & training

Our engineers install and commission the machine and train your operators.

Since 1998

Designing and building pharmaceutical machinery in Ahmedabad, India – for customers in more than 45 countries.

Why Adinath International

Why Hong Kong Buyers Choose Adinath International

Over 25 years in pharma machinery

Manufacturing since 1998, across injectables, oral solids, liquids, semi-solids and packaging.

Three in-house units

Filling & packaging, process equipment and encapsulation divisions with VMC, CNC and fabrication facilities.

Built to your URS

Customised to your product, format and output, with optional 21 CFR Part 11 automation features.

Quality-focused manufacturing

ISO 9001:2015 certified, with machines designed to GMP and cGMP requirements.

One machine to a full plant

Single machines, complete production lines, or turnkey support including layouts and HVAC design.

Installation & training

Our own engineers handle installation, commissioning and operator training at your site.

Industries

Industries We Supply

Pharmaceutical & Biotech

Injectables, oral solid dosage, liquid orals and topicals.

Explore →

Nutraceutical & Food

Capsule, tablet, powder and bottle filling for supplements and food products.

Explore →

Cosmetic & Personal Care

Cream and ointment manufacturing, tube filling, capping and labeling.

Explore →

Chemical

Reactors, vessels, powder mixers and storage tanks for chemical processing.

Explore →

Infrastructure

Our Manufacturing Capabilities

Every Adinath machine is manufactured in our own facilities in Ahmedabad, India, across three specialised units with a combined area of about 25,000 sq. ft.

1Unit 1 – Filling & Packaging Division

2Unit 2 – Process Equipment Division

3Unit 3 – Encapsulation Machine Division

Our workshops are equipped with vertical machining centres (VMC), CNC lathes, pillar drills, welding and buffing equipment, and hydraulic test and metal-finish measuring equipment – so critical components are machined, finished and checked in-house.

Machining, welding and fabrication workshops at Adinath International, Ahmedabad
Encapsulation machine manufacturing unit of Adinath International

FAQ · Hong Kong

Questions Hong Kong Buyers Ask Us

What Hong Kong licensed manufacturers and packers ask us about PIC/S GMP, small-site installation, power supply and delivery.

Machines & space

Compact and semi-automatic capsule fillers, single-sided tablet presses, liquid and syrup fillers, blister packers, sticker labelers and capping machines are typical. For sterile work we offer smaller ampoule and vial machines. Explore the product range.
In many cases, yes. We review lift dimensions, door widths and floor loading before quoting, size crates accordingly and, where the design allows, ship the machine in sections that our engineers reassemble on site. The offer confirms how your machine will be delivered.
Yes. Blister packing, bottle filling and capping, labeling and other secondary operations can be covered with individual machines or a short connected line, matched to the scope of your licence.

Licensing & GMP

The Pharmacy and Poisons (Manufacturers Licensing) Committee under the Pharmacy and Poisons Board, with the Drug Office of the Department of Health as its executive arm. The Board has been a PIC/S participating authority since 2016, and full PIC/S GMP compliance is a key licensing requirement.
Machine drawings, functional and technical specifications, certificates showing the SS 316L used wherever product touches the machine, qualification support for your IQ and OQ, and the manuals named in the order. If you keep electronic records, Part 11-ready controls are an available option.
It matters for documentation. Proprietary Chinese medicines fall under a separate regulatory regime, so tell us which machines are used for which product types and we prepare the documents with the relevant requirements in mind.

Power, delivery & support

Hong Kong supplies 220 V single-phase and 380 V three-phase at 50 Hz. Larger machines use three-phase; some compact models can run on single-phase. Each offer lists the exact supply and load.
By sea from India to the Hong Kong container terminals, then by truck to your building. Who clears the goods, arranges the truck and handles lifting into the premises is set out in the Incoterms and delivery notes of your quotation.
Our engineers position, connect and commission the machine and train your staff. Afterwards the technical team in Ahmedabad answers questions, diagnoses faults and supplies change parts via info@adinath.co.in or +91 79905 55507.

Quotations

Product and dosage form, container or pack format, output, cleanroom grade, licence scope (manufacture or packing), room size, lift and door dimensions, floor loading and power supply. We come back to you within 24 working hours – send your details.

Start your Hong Kong project

Looking for Pharmaceutical Machinery in Hong Kong?

Tell us about your product, container and required output. Our technical team will reply within 24 working hours with suitable machine options and the next steps for your project.

Corporate office
B-20, Suryam Industrial Park, S.P. Ring Road, Nikol, Ahmedabad 382350, India

Send Your Inquiry

All fields marked * are required.

    FIRST NAME *

    LAST NAME *

    EMAIL ADDRESS *

    PHONE NUMBER *

    SUBJECT

    HOW CAN WE HELP?