Export desk · Costa Rica

Pharmaceutical Machinery Manufacturer & Exporter for Costa Rica

Costa Rican medicine makers are checked by the Ministerio de Salud against RTCA 11.03.42:07, the Central American GMP regulation – and its verification guide turns equipment into a list of concrete inspection questions. Adinath International builds ampoule, vial, liquid, powder, capsule, tablet and packaging machines in Ahmedabad, India, to answer those questions, with 60 Hz electrics and Spanish manuals.

✓  Ready for the RTCA checklist   ·   ✓  60 Hz motors and drives   ·   ✓  Shipped to Moín or Caldera

Six head ampoule filling and sealing machine manufactured by Adinath International

Six Head Ampoule Filling & Sealing Machine
Designed and manufactured at our Ahmedabad works

Since 1998

Designing and manufacturing pharmaceutical machinery

3 Units

Filling & packaging, process equipment and encapsulation divisions

25,000 sq. ft.

Combined manufacturing area in Ahmedabad, India

45+ Countries

Where our customers operate Adinath machines

Equipment for inspection under the RTCA

Machinery for Costa Rican Pharmaceutical and Natural Product Laboratories

Costa Rica regulates medicine manufacturing through its Ministry of Health, which verifies good manufacturing practice under the Central American Technical Regulation RTCA 11.03.42:07. The regulation, approved regionally in 2014 and rooted in the WHO’s GMP guidance, is applied with an official verification guide that inspectors use point by point – including the sections on equipment design, installation, cleaning and maintenance.

A single laboratory may combine several dosage forms under one roof: a tablet and capsule area, a liquid-oral line, perhaps a small sterile suite or a range of natural and supplement products. That calls for flexible machines that change over easily and are simple to document. Adinath International has been building exactly that kind of equipment since 1998, in three units of its own in Ahmedabad, and machines from those units are in use at customer sites in more than 45 countries.

Working with a Costa Rican customer, we translate the URS into a machine configuration, confirm the documentation list with your regente farmacéutico or QA manager, and run the machine in our works before it is packed. Our engineers then install it at your plant and train the team. For a new building or expansion, our turnkey projects group can support layout, detailed engineering and HVAC design.

The angle that matters most in Costa Rica is that checklist-driven inspection. Because the RTCA verification guide asks specific questions – are product-contact surfaces non-reactive, can the equipment be cleaned, is there a maintenance and calibration record – we organise the machine file so each answer can be found quickly. At the same time we plan for a 60 Hz supply, single-phase 120 V and site-specific three-phase voltages, and for humid tropical conditions around panels and compressed air, all confirmed with your engineering team.

What Costa Rican buyers can expect

  • A machine file indexed to the equipment points of the RTCA verification guide
  • Wetted surfaces in SS 316L with certificates for each grade
  • Motors and controls engineered for 60 Hz and your three-phase service
  • Spanish operating and cleaning instructions available
  • Quick-changeover options for multi-product rooms
  • Installation, start-up and training by our own engineers

At a glance

Costa Rica: what your equipment must meet

  • Authority: Ministerio de Salud – GMP verification and inspection of manufacturers
  • GMP regulation: RTCA 11.03.42:07, with its official verification guide
  • Basis: WHO GMP guidance (Expert Committee Report 32)
  • Power supply: 120 V single-phase, 60 Hz; three-phase voltage confirmed per site
  • Ports: Moín/Limón (Caribbean) and Caldera (Pacific)
  • Language: Spanish

Machinery range

Pharmaceutical Machinery We Export to Costa Rica

Flexible machines for multi-product Costa Rican laboratories – oral solids, liquids, sterile filling and supplements, each wired for 60 Hz.

01  Sterile injectable lines

Automatic ampoule filling and sealing machine for injectable production

Ampoule Filling & Sealing Machines

Two, four, six and eight head machines for open and closed ampoules, including servo-driven models.

Automatic vial filling and rubber stoppering machine

Vial Filling & Stoppering Machines

Liquid vial filling with rubber stoppering, available with capping and sealing for complete injectable lines.

High speed automatic rotary ampoule and vial washing machine

Ampoule & Vial Washing Machines

Rotary and linear washers that prepare glass containers ahead of sterilisation and filling.

Sterilizing and depyrogenation tunnel for ampoules and vials

Sterilisation & Depyrogenation

Sterilising and depyrogenation tunnels, dry heat sterilisers and ETO sterilisers.

02  Oral solid dosage & blister packaging

Semi automatic capsule filling machine

Capsule Filling Machines

Manual, semi-automatic and high-speed automatic capsule fillers, from R&D scale to production.

Rotary tablet press machine for pharmaceutical tablets

Tablet Compression Machines

Single and double side rotary tablet presses, including mini presses for development batches.

Injectable powder filling and rubber stoppering machine

Powder Filling Machines

Dry syrup powder and injectable powder filling machines for bottles and vials.

Alu PVC blister packing machine for tablets and capsules

Blister Packing Machines

Alu-PVC and Alu-Alu blister packaging machines for tablets and capsules.

03  Liquids, labeling, capping & R&D

Liquid filling machine for pharmaceutical bottles

Liquid & Syrup Filling Machines

Bottle filling and monoblock filling-capping machines for syrups, oral liquids and eye drops.

Automatic bottle sticker labeling machine

Sticker Labeling Machines

Self-adhesive labelers for ampoules, vials and bottles.

Bottle capping and sealing machine

Capping & Sealing Machines

ROPP and screw capping machines for bottles, and cap sealing machines for vials.

R&D model ampoule filling and sealing machine for laboratories

R&D & Pilot Lab Machines

Lab-scale ampoule, vial and bottle machines for development and small-batch work.

Country focus: Costa Rica

Exporting to Costa Rica: What We Clarify Up Front

Whether a Costa Rican order covers a single capsule filler or a complete liquid line, these six points are fixed in writing with the customer before we release a design for manufacture.

Verification-guide ready

Inspectors work through the RTCA 11.03.42:07 verification guide item by item. We index the machine file – materials, drawings, cleaning instructions, IQ/OQ support – so your QA manager can answer each equipment question with a page reference.

Multi-product changeovers

Shared rooms mean frequent product changes. We review change parts, tool-free dismantling and cleaning access with you, so changeover and line clearance stay short and repeatable.

60 Hz electrics

Costa Rica runs at 60 Hz with 120 V single-phase and several three-phase voltages in use. Motors, pumps and drives are selected for 60 Hz, and the panel follows the voltage you confirm from site.

Humidity & utilities

A humid climate can affect electrical cabinets and pneumatic components. We ask about room conditioning, air dryers and cabinet location during design and recommend protection where it is needed.

Moín or Caldera

Crates can arrive on the Caribbean side at Moín near Limón, or on the Pacific side at Caldera. We suggest the port that best fits your site and agreed delivery terms.

Spanish instructions

Operator, cleaning and maintenance manuals are available in Spanish so they can go straight into your SOP system; technical drawings can remain in English.

How a project runs

From Enquiry to Commissioning in Six Steps

A clear, documented sequence – so your quality team knows what to expect at every stage.

01

Enquiry & URS

Share your product, container type and size, target output and cleanroom grade.

02

Technical proposal

Machine configuration, layout, utilities, documentation scope and delivery terms.

03

Design approval

You review and approve the machine specification and drawings before manufacturing.

04

Manufacturing

The machine is built in our Ahmedabad units and checked before dispatch.

05

Packing & shipping

Packed for sea freight and delivered via Moín or Caldera to your laboratory under the agreed Incoterms.

06

Installation & training

Our engineers install and commission the machine and train your operators.

Since 1998

Designing and building pharmaceutical machinery in Ahmedabad, India – for customers in more than 45 countries.

Why Adinath International

Why Costa Rican Buyers Choose Adinath International

Over 25 years in pharma machinery

Manufacturing since 1998, across injectables, oral solids, liquids, semi-solids and packaging.

Three in-house units

Filling & packaging, process equipment and encapsulation divisions with VMC, CNC and fabrication facilities.

Built to your URS

Customised to your product, format and output, with optional 21 CFR Part 11 automation features.

Quality-focused manufacturing

ISO 9001:2015 certified, with machines designed to GMP and cGMP requirements.

One machine to a full plant

Single machines, complete production lines, or turnkey support including layouts and HVAC design.

Installation & training

Our own engineers handle installation, commissioning and operator training at your site.

Industries

Industries We Supply

Pharmaceutical & Biotech

Injectables, oral solid dosage, liquid orals and topicals.

Explore →

Nutraceutical & Food

Capsule, tablet, powder and bottle filling for supplements and food products.

Explore →

Cosmetic & Personal Care

Cream and ointment manufacturing, tube filling, capping and labeling.

Explore →

Chemical

Reactors, vessels, powder mixers and storage tanks for chemical processing.

Explore →

Infrastructure

Our Manufacturing Capabilities

Every Adinath machine is manufactured in our own facilities in Ahmedabad, India, across three specialised units with a combined area of about 25,000 sq. ft.

1Unit 1 – Filling & Packaging Division

2Unit 2 – Process Equipment Division

3Unit 3 – Encapsulation Machine Division

Our workshops are equipped with vertical machining centres (VMC), CNC lathes, pillar drills, welding and buffing equipment, and hydraulic test and metal-finish measuring equipment – so critical components are machined, finished and checked in-house.

Machining, welding and fabrication workshops at Adinath International, Ahmedabad
Encapsulation machine manufacturing unit of Adinath International

FAQ · Costa Rica

Questions Costa Rican Buyers Ask Us

Answers for Costa Rican laboratories on Ministry of Health GMP verification, the RTCA regulation, multi-product equipment, 60 Hz power, ports and support.

Equipment choice

Capsule fillers, tablet presses and blister machines for solids; liquid fillers, cappers and labelers for syrups and drops; and ampoule and vial lines for injectables. Full specifications are on our product pages.
Yes. Capsule, tablet and powder filling machines from our nutraceutical range are used for herbal, natural and supplement products. Tell us the product category so the documentation fits the rules your product falls under.
Often, yes. With the right change parts and format range, one capsule filler or liquid line can serve several products. We review your product list and recommend a configuration that keeps changeovers practical.

Ministry of Health & RTCA GMP

The regulation and its verification guide expect equipment to suit its purpose, be cleanable, use non-reactive product-contact materials and be maintained and calibrated. Our GMP and cGMP-oriented design with SS 316L contact parts, plus drawings and IQ/OQ documentation support, gives your QA team the evidence for those points.
The Ministry verifies GMP at your facility, which can include inspection of production equipment and its records. Responsibility for qualification and maintenance stays with your laboratory; we provide the supplier documentation that supports it.
Yes. The manual for each machine describes dismantling, the parts that touch product and how they are cleaned and reassembled. Your QA team can adapt that text into cleaning SOPs and cleaning validation, which the RTCA verification guide also examines.

Delivery, power & support

Either Moín on the Caribbean coast or Caldera on the Pacific, chosen according to your location and freight terms. Port, transit plan and Incoterms are confirmed in the quotation.
Yes. Everything is engineered for 60 Hz. Because three-phase voltages differ from site to site, we ask for your supply details and design the electrical panel to match.
Adinath engineers come to Costa Rica to install, commission and train. After handover, our technical team answers process, fault and spare-part questions through info@adinath.co.in or +91 79905 55507, and can plan a further visit if required.

Quotations

Your product list and dosage forms, container sizes, output, room classification, supply voltage, preferred port and language for documents. Our technical team replies to new enquiries within 24 working hours – send yours now.

Start your Costa Rican project

Looking for Pharmaceutical Machinery in Costa Rica?

Tell us about your product, container and required output. Our technical team will reply within 24 working hours with suitable machine options and the next steps for your project.

Corporate office
B-20, Suryam Industrial Park, S.P. Ring Road, Nikol, Ahmedabad 382350, India

Send Your Inquiry

All fields marked * are required.

    FIRST NAME *

    LAST NAME *

    EMAIL ADDRESS *

    PHONE NUMBER *

    SUBJECT

    HOW CAN WE HELP?