Description
Automatic Empty Tube Sticker Labeling Machine or Tube Labeler applies label onto plastic tubes. After filling and sealing tubes are loaded onto infeed hopper of the labeling machine from where they are delivered to the roller conveyor of the machine. Roller conveyor is having spacing with same diameter as of tube diameter for perfect placement of tubes onto rollers. During transportation onto roller conveyor tubes reached to the labeling station where label dispenser dispense label onto tubes one by one. Further there is pressing device below which tube passed. Pressing device is equipped with spounge belt through label get pressed onto tube for proper placement. Duly labeled tubes collected automatically onto exit collection tray of the machine.
Empty tube labeler equipped with PLC HMI based control mechanism for automatic operations. Precisely built roller perform smooth operation with minimal possible rejection. There is option to add missing label sensor onto machine through which any missing label tube can be detected and alarm signal can be provided onto HMI.
Working Principle of Filled Tube Labeler
The Loading hopper releases containers into a roller conveyor in which each containers each held some distance by separators rollers and back up guide are passed to the labeling station in an upright position. When the ampoules/vials reaches to the labeling station, the sensor operates the servo motor. At this point of time, the sticker touches the ampoules/vials and wrapped over the ampoules/vials by the driven belt on roller. Then Rubber belts press the Labels on ampoules/vials during passing through Rubber belt. The labeled ampoules/vials pushed to unloading tray.
Technical Specification of Tube Labeler Machine
| Model | AASL-150 |
| Production Rate | Up to 150 Tubes/Minute |
| Type of Labels | Self-adhesive sticker labels |
| Tube Diameter | As per sample |
| Tube Height | As per sample |
| Label Length | 20mm to 50mm |
| Label Width | 15mm to 60mm |
| Label Roll Core Diameter | 75 to 76mm |
| Power Specification | 0.5 H.P. |
| Electrical Characteristics | 230 Volts, Single Phase 400/750W Servo Motor with encoder |
| Overall Dimension | 1500mm (L) x 700mm (W) x 1250mm (H) approx. |
* Power voltage can be adjusted as per customer’s domestic power voltage requirements.
* Rights of technical improvements & modification reserved.
* Illustrations & dimensions are shown for information purpose only.
FAQ of Automatic Empty Tube Sticker Labeling Machine
What is the production capacity of the machine?
The model AASL-150 can label up to 150 tubes per minute, depending on tube size and label specifications.
How does the labeling process work?
Tubes enter from the infeed hopper onto a roller conveyor with spacing matched to the tube diameter. At the labeling station a dispenser applies the label; a sponge-belt pressing device then firmly secures it as the tube passes underneath. Fully labeled tubes are automatically discharged to the collection tray. The system is controlled by a PLC with HMI.
What label and tube size ranges are supported?
It handles self-adhesive sticker labels with lengths of 20–50 mm and widths of 15–60 mm (core diameter 75–76 mm). Tube diameter and height are accommodated according to the customer’s sample.
Does the machine include missing-label detection?
Yes. An optional missing-label sensor can be fitted. If a tube leaves without a label, the system detects it and triggers an alarm signal on the HMI.
What are the power requirements and overall dimensions?
Power is 0.5 HP with a 230 V single-phase supply (400/750 W servo motor with encoder; voltage can be adjusted to local requirements). Approximate overall dimensions are 1500 mm (L) × 700 mm (W) × 1250 mm (H).
Is Automatic Empty Tube Sticker Labeling Machine cGMP, MHRA, FDA and WHO-GMP Compliant?
Yes — Adinath International Automatic Empty Tube Sticker Labeling Machine complies to cGMP, MHRA, FDA and WHO-GMP standards, with optional CE marked equipment’s and 21 CFR Part 11 software compliance for the HMI/PLC. Machine contact parts having Stainless Steel 316L grade materials with validation documents having IQ, OQ, DQ validation protocols as optional. Organization is ISO 9001:2015 certified.
What is the lead time for Automatic Empty Tube Sticker Labeling Machine?
Manufacturing lead time is generally 7 to 14 weeks from order confirmation. Further it takes 2 to 8 weeks for international shipping depending upon destination. Order can be expediate sooner or later as per specific buying requirements. Destination specific certifications like US FDA, EU, ANVISA, SFDA. CE can add 3 to 6 weeks additionally.
Does Adinath International provide Automatic Empty Tube Sticker Labeling Machine internationally?
Yes, Adinath International Automatic Empty Tube Sticker Labeling Machine export this machine to more than 48 countries of this world including America, Europe, Asia, Middle East, Africa, CIS and Australia sub continents. Please visit our clientele page for complete list of our customers worldwide. See the turnkey project page for our complete plant offerings.
Does After Sales Support provided for Automatic Empty Tube Sticker Labeling Machine?
Service of skilled engineers and technicians provided for technical support of supplied equipment’s. Installations, commissioning, training and IQ, OQ, DQ validations performed by qualified engineers. Remote support through video call, phone, email and other modes provided for international installations. Spare parts of Automatic Empty Tube Sticker Labeling Machine stocked at our premises in Ahmedabad and shipped immediately after ordering. Standard 12 months manufacturing warranty included with supplied equipment.
