Description

Sterile Liquid Filling Machine is made in pleasing matt finished stainless steel materials. The basic unit consists of turntable, Stainless Steel Stat conveyor belt, unique eccentric pre-gassing, filling and post-gassing. Highly efficient and precision built Stainless Steel 316L Syringes, non- toxic synthetic rubber tubing and easy reach compact panel.

The minimal distance between filling and stoppering units reduces the risk of contamination. The machines are designed for operation in a sterile area and for use under laminar flow protection. The un-scrambler itself has been redesigned to eliminate dead ends and difficult-to-clean spots.

Salient Features of Sterile Liquid Filling Machine

  • Suitable for the filling Volume of 2ml to 250ml.

  • Piston pump/Peristaltic pump aseptic filling.

  • Filling accuracy of ±1%.

  • No cross contamination.

  • Easy to validate filling system for small/large batch production.

  • All Contact Parts Made from Stainless Steel 316L & framework by Stainless Steel 304.

  • Variable A.C. frequency drive for speed adjustment.

  • Digital Vial Counter for counting production output.

  • In-feed Turn Table/ Unscrambler for automatic feeding of objects.

  • On-line Mechanism.

  • “No Vial – No Filling” System.

  • “No Vial – Machine Stop” System.

  • IQ/OQ documentation can be provided.

  • PLC system with Graphical User Interface. (Optional)

Process Operation of Sterile Liquid Filling Machine

Bottles are feed on to in-built Infeed turn table, from where it delivered to SS conveyor belt. Conveyor belt transport bottles to filling station. Filling station has Pneumatic bottle stopper for exact bottle neck centering of bottles during filling operation.

Nozzle goes upwards slowly from the bottom level of bottle towards neck during filling to minimize forming adjustable nozzle is reciprocating according to filling dose

The dosing block with a hexagonal bolt, this means different fill size can be set easily within minimum use of time.

After liquid filling bottles are delivered to capping/labeling machine conveyor for further operations.

Technical Specification of Sterile Liquid Filling Machine

Model ALVF-40 ALVF-80 ALVF-120 ALVF – 250
Filling Heads Two Four Eight Twelve
Production Rate Up to 40 Vials/Minute Up to 80 Vials/Minute Up to 150 Vials/Minute Up to 250 Vials/Minute
Input Specification
Vial Diameter 15mm to 70mm 15mm to 70mm 15mm to 70mm 15mm to 70mm
Vial Height 25mm to 140mm 25mm to 140mm 25mm to 140mm 25mm to 140mm
Filling Precision ±1% ±1% ±1% ±1%
Power Required 1 H.P. 1.5 H.P. 2 H.P. 2 H.P.
Electrical Characteristics 440 Volts, 3 Phase, 50 Hertz 440 Volts, 3 Phase, 50 Hertz 440 Volts, 3 Phase, 50 Hertz 440 Volts, 3 Phase, 50 Hertz
Overall Dimension 2050mm (L) x 850mm (W) x 1700mm (H) 2200mm (L) x 850mm (W) x 1700mm (H) 3000mm (L) x 945mm (W) x 1700mm (H) 3500mm (L) x 945mm (W) x 1700mm (H)

* Power voltage can be adjusted as per customer’s domestic power voltage requirements.
* Rights of technical improvements & modification reserved.
* Illustrations & dimensions are shown for information purpose only.

FAQ of Sterile Liquid Filling Machine

The machine is suitable for filling volumes ranging from 2 ml to 250 ml.

It uses piston pump or peristaltic pump systems for aseptic filling operations.

The machine offers a filling precision (accuracy) of ±1%.

All contact parts are made from Stainless Steel 316L, while the framework is constructed from Stainless Steel 304.

Key features include “No Vial – No Filling” system, “No Vial – Machine Stop” system, no cross-contamination design, minimal distance between filling and stoppering units to reduce contamination risk, and a redesigned unscrambler that eliminates dead ends and hard-to-clean spots. The machines are designed for sterile area operation under laminar flow protection.

Yes — Adinath International Sterile Liquid Filling Machine complies to cGMP, MHRA, FDA and WHO-GMP standards, with optional CE marked equipment’s and 21 CFR Part 11 software compliance for the HMI/PLC. Machine contact parts having Stainless Steel 316L grade materials with validation documents having IQ, OQ, DQ validation protocols as optional. Organization is ISO 9001:2015 certified.

Manufacturing lead time is generally 7 to 14 weeks from order confirmation. Further it takes 2 to 8 weeks for international shipping depending upon destination. Order can be expediate sooner or later as per specific buying requirements. Destination specific certifications like US FDA, EU, ANVISA, SFDA. CE can add 3 to 6 weeks additionally.

Yes, Adinath International Sterile Liquid Filling Machine export this machine to more than 48 countries of this world including America, Europe, Asia, Middle East, Africa, CIS and Australia sub continents. Please visit our clientele page for complete list of our customers worldwide. See the turnkey project page for our complete plant offerings.

Service of skilled engineers and technicians provided for technical support of supplied equipment’s. Installations, commissioning, training and IQ, OQ, DQ validations performed by qualified engineers. Remote support through video call, phone, email and other modes provided for international installations. Spare parts of Sterile Liquid Filling Machine stocked at our premises in Ahmedabad and shipped immediately after ordering. Standard 12 months manufacturing warranty included with supplied equipment.