• Bottle Washing & Cleaning Machine

Description

Bottle Washing Machine or Rotary Bottle Washing Machine is high efficient machine with elegant look. Machine based on Geneva type indexing mechanism for movement of bottles. Machine structure is sturdy and accurate configuration which offers superior functionality for using in pharmaceutical, Food, Cosmetic, Chemical & beverage industries. This multifunctional multi featured equipment meets GMP requirements of washing for glass as well plastic bottles. Bottle washing machines offered by us in easy to operate and minimum maintenance required.

Features of Bottle Washing Machine

  • Small footprint.

  • Geneva type indexing mechanism.

  • Four inner, one outer and one air wash.

  • Two water tanks equipped with machine with optional facility to have heaters.

  • Sequence of washes of washes to customer’s choice

  • Stationary nozzles eliminate contamination of water cycles.

  • Easy loading and unloading with two rows.

  • Individual solenoid valve for each washing sequence.

  • Pumps and tanks are mounted on parable stand for easy maintenance.

  • Easy operation.

  • Higher capacity centrifugal pumps to wash bigger bottles.

  • The stationary nozzles avoid chipping of bottle necks.

  • Bottle guide system especially for lightweight bottle.

  • Pumps and Tanks are mounted on portable stand for easy maintenance.

  • Separate panel control to avoid any short circuit due to spraying of water.

  • S.S. glycerin fill pressure meter.

Working Process of Bottle Washing Machine

The bottles are loaded on the subsequent indexing part of rotating platform and are cleared in series of operations. Specially designed bottle holders are provided to hold bottles with neck diameter. The bottles are placed in an inverted position in these cup shaped holders. Spraying showers does the external cleaning of the bottles. Solenoid valves are provided to enable the regulation of wash timings, it also spraying water when bottle are stopped means ensure saving of water and sequence of various washing media to suit specific requirement.

Washing Cycle of Bottle Washing Machine

1st Wash Recirculated Water (Drain)
2nd Wash Recirculated Water (Drain)  (Inner & Outer)
3rd Wash Fresh D. M. Water
4th Wash Fresh D. M. Water

Note: Buyer should have to provide 3 bar pressure at the inlet of filtered air

Technical Specification of Bottle Washing Machine

Model No ARBW – 64 ARBW – 100
Production Output Up to 60 Bottles / Minute (Depending on Bottle Size) Up to 100 Bottles / Minute (Depending on Bottle Size)
Input Specification Diameter of the container : 25 mm to 100mm Diameter of the container : 25 mm to 100mm
Outside Diameter of Neck : 20 mm to 38 mm (with the help of change parts ) Outside Diameter of Neck : 20 mm to 38 mm (with the help of change parts )
Height of the container : Up to 280 mm (with the help of change parts ) Height of the container : Up to 280 mm (with the help of change parts )
Power Supply Main Unit : 0.75 H.P., 380 Volt, 3 Phase, 4 Wire System, 50 Hz Main Unit : 0.75 H.P., 380 Volt, 3 Phase, 4 Wire System, 50 Hz
Optional Accessories (2 Pumps – Pumping Station ) 0.75 H.P., 380 Volt, 3 Phase, 4 Wires System , 50 Hz Optional Accessories (2 Pumps – Pumping Station ) 0.75 H.P., 380 Volt, 3 Phase, 4 Wires System , 50 Hz
Electric Heater Tank : 2 K.W. Electric Heater Tank : 2 K.W.
Overall Dimension 1550 mm (L) x 1700 mm (W) x 1300 mm (H) approx. 1800 mm (L) x 1700 mm (W) x 1300 mm (H) approx.
Air Consumption 30 CFM @ 5 bar 30 CFM @ 5 bar
Net Weight 650 kgs. approx. 750 kgs. approx.
Gross Weight 1050 Kgs. approx. 1150 Kgs. approx.

* Power voltage can be adjusted as per customer’s domestic power voltage requirements.
* Rights of technical improvements & modification reserved.
* Illustrations & dimensions are shown for information purpose only.